Black Annealed Wire Rewound Coils Black Annealed Bulk Wire

       It is drawn into a suitable wire diameter by high-quality Q195            wire rod, and then put into an annealing furnace to be fired and          cooled at a certain temperature to become a relatively soft steel          wire.

      Annealed iron wire has good gloss, strong flexibility, is not easy          to corrode, can be used for a long time, is not easy to be                      damaged, and is very suitable for binding.

      The diameter range of annealed steel wire is very wide, from              0.6mm-5.5mm, and the coil weight is 1kg, 5kg, 25kg. . . .                    800kg/1000kg/roll. It can be used by different groups of people          on different occasions.

      The large roll annealed wire rewound coils is made by rewinding        the drawn large roll cold drawn wire. The intention is for it to              open in such a way that it goes from the top of each roll all the            way to the bottom, rather than from the outer ring to the inner             ring. The weight of each roll is 800-1000kg, and the whole roll           has one thread end. This kind of coil weight and                                   opening method  is very labor-saving and time-saving. Each roll         is very convenient to use, and you don’t always have to worry             about splicing  when you are running out, because it will last for          a long time.

       Annealed wire is widely used in construction binding, hardware           products,  vegetable orchards, medical equipment and other                 fields.

        At present, more and more factories prefer this kind of coil                  weight, because it saves time and effort.