Black Annealed Wire Rewound Coils
- • It is drawn into a suitable wire diameter by high-quality Q195 wire rod, and then put into an annealing furnace to be fired and cooled at a certain temperature to become a relatively soft steel wire.
- • It is drawn into a suitable wire diameter by high-quality Q195 wire rod, and then put into an annealing furnace to be fired and cooled at a certain temperature to become a relatively soft steel wire.
- •The diameter range of annealed steel wire is very wide,from 0.6mm-5.5mm, and the coil weight is 1kg, 5kg, 25kg. . . . 800kg/1000kg/roll. It can be used by different groups of people on different occasions.
- •The large roll annealed wire rewound coils is made by rewinding the drawn large roll cold drawn wire. The intention is for it to open in such a way that it goes from the top of each roll all the way to the bottom, rather than from the outer ring to the inner ring. The weight of each roll is 800-1000kg, and the whole roll has one thread end. This kind of coil weight and opening method is very labor-saving and time-saving. Each roll is very convenient to use, and you don’t always have to worry about splicing when you are running out, because it will last for a long time.
- • Annealed wire is widely used in construction binding,hardware products, vegetable orchards, medical equipment and other fields.
- • At present, more and more factories prefer this kind of coil weight, because it saves time and effort.
Write your message here and send it to us
